PR-0410 | AutoWrap tape | protection | polyolefin film | rubber adhesive

Item No.WEB0005
UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage. Top performance features: excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bi

Description

UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage.

Top performance features:
  • excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bird soil etc.)
  • stretchable so easily conforms to all shapes and forms
  • easy removal without adhesive residues
Application:
  • protection of painted car parts: hood, roof, trunk
  • protection of other damage prone parts of the car, such as pillars, emblems, door handles, mirrors etc.
Available standard sizes:
  • 1220MMX200M
  • 200MMX200M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
PROTECTION
Product
0410
Color
WHITE
Total thickness (micron)
102.5
Total thickness Range
[100 - 150> micron
Backing material
POLYOLEFIN FILM
Adhesive system
RUBBER ADHESIVE
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (Afera 5004)
740
Elongation (Afera 5004) Range
[500 and up cm
Peel adhesion 90° (N/25MM) (Afera 5001)
1.4N/25MM
Peel adhesion 90° (Afera 5001) Range
[0 - 5> N/25mm
Peel adhesion 180° (N/25MM) (Afera 5001)
1.7N/25MM
Peel adhesion 180° (Afera 5001) Range
[0 - 5> N/25mm
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
473
Peel multiplier Range
[200 and up %
Tensile strength (N/25mm)
113.13
Tensile strength Range
[100 - 200> N/25mm
Tack level (ASTM D3121)
ROLLING BALL 85CM
Tack level (ASTM D3121) Range
[50 and up cm
Image slider
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

It is important that the car part is dry and dust-free prior to application.
If the surface is dirty, clean it with only water.
Afterwards, dry the surface before applying the AutoWrap.

Unwinding

Dispense the AutoWrap. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

The application requires 2 operators that each stand on one side of the vechicle part. Simultaneously lay the AutoWrap film on the surface with a quick, smooth movement.
Thereafter, smoothen the AutoWrap by using a squeegee. Important is working from the middle to the edge of the car part as this minimizes wrinkels. Leaving some wrinkles is acceptable. AutoWrap is designed to protect with or without wrinkles.

Finally, in order to obtain a flush lay-out, use ABI Tape’s designed AutoWrap cutters to cut the film between panels.

Application – function

The car part is now protected for scratches and dirt during assembly, transit and storage. AutoWrap has at least 6 months of life time after applying.

Removal

AutoWrap ensures an easy and one piece removal without leaving adhesive residue on the surface. A quick pull from one corner is sufficient to remove the film without tearing or ripping.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Jonas Poppe | Business Unit Manager | Automotive (protective) products
phone +32 55 23 51 71 | mobile +32 472 22 41 12 | mail 
jonas.poppe@abitape.eu
CONTACT US

PR-0410 | AutoWrap tape | protection | polyolefin film | rubber adhesive

Item No.WEB0005
UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage. Top performance features: excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bi

Description

UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage.

Top performance features:
  • excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bird soil etc.)
  • stretchable so easily conforms to all shapes and forms
  • easy removal without adhesive residues
Application:
  • protection of painted car parts: hood, roof, trunk
  • protection of other damage prone parts of the car, such as pillars, emblems, door handles, mirrors etc.
Available standard sizes:
  • 1220MMX200M
  • 200MMX200M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
PROTECTION
Product
0410
Color
WHITE
Total thickness (micron)
102.5
Total thickness Range
[100 - 150> micron
Backing material
POLYOLEFIN FILM
Adhesive system
RUBBER ADHESIVE
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (Afera 5004)
740
Elongation (Afera 5004) Range
[500 and up cm
Peel adhesion 90° (N/25MM) (Afera 5001)
1.4N/25MM
Peel adhesion 90° (Afera 5001) Range
[0 - 5> N/25mm
Peel adhesion 180° (N/25MM) (Afera 5001)
1.7N/25MM
Peel adhesion 180° (Afera 5001) Range
[0 - 5> N/25mm
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
473
Peel multiplier Range
[200 and up %
Tensile strength (N/25mm)
113.13
Tensile strength Range
[100 - 200> N/25mm
Tack level (ASTM D3121)
ROLLING BALL 85CM
Tack level (ASTM D3121) Range
[50 and up cm
Image slider
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

It is important that the car part is dry and dust-free prior to application.
If the surface is dirty, clean it with only water.
Afterwards, dry the surface before applying the AutoWrap.

Unwinding

Dispense the AutoWrap. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

The application requires 2 operators that each stand on one side of the vechicle part. Simultaneously lay the AutoWrap film on the surface with a quick, smooth movement.
Thereafter, smoothen the AutoWrap by using a squeegee. Important is working from the middle to the edge of the car part as this minimizes wrinkels. Leaving some wrinkles is acceptable. AutoWrap is designed to protect with or without wrinkles.

Finally, in order to obtain a flush lay-out, use ABI Tape’s designed AutoWrap cutters to cut the film between panels.

Application – function

The car part is now protected for scratches and dirt during assembly, transit and storage. AutoWrap has at least 6 months of life time after applying.

Removal

AutoWrap ensures an easy and one piece removal without leaving adhesive residue on the surface. A quick pull from one corner is sufficient to remove the film without tearing or ripping.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Jonas Poppe | Business Unit Manager | Automotive (protective) products
phone +32 55 23 51 71 | mobile +32 472 22 41 12 | mail 
jonas.poppe@abitape.eu
CONTACT US