العربية (مصر)
PR-1402 | AutoWrap tape | protection | polyolefin film | rubber adhesive
Item No.WEB0092
UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage. Top performance features: excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bi
Description
UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage.
Top performance features:
Available standard sizes:
Top performance features:
- excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bird soil etc.)
- stretchable so easily conforms to all shapes and forms
- easy removal without adhesive residues
- protection of painted car parts: hood, roof, trunk
- protection of other damage prone parts of the car, such as pillars, emblems, door handles, mirrors etc.
| Tesa | Polifilm | Nitto |
|---|---|---|
| Tesa 50560 protective film | Polifilm PFA6173/34
Polifilm PFA6143/32 Polifilm PFA6451/34 Polifilm PFA6104/32 Polifilm PFA6172/34 | Nitto SPV RAPGARD F124 |
- 1500MMX200M
- 300MMX200M
- 150MMX200M
Specifications
- -- PROPERTIES --
- ----------
- Application
- PROTECTION
- Product
- 1402
- Color
- WHITE
- Total thickness (micron)
- 50
- Backing material
- POLYOLEFIN FILM
- Adhesive system
- RUBBER ADHESIVE
- Duration bond
- TEMPORARY
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 500
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 3.4N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 195
- Tensile strength (N/25mm)
- 45
- Tack level (ASTM D3121)
- ROLLING BALL 91CM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
It is important that the car part is dry and dust-free prior to application.
If the surface is dirty, clean it with only water.
Afterwards, dry the surface before applying the AutoWrap.
Unwinding
Dispense the AutoWrap. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
The application requires 2 operators that each stand on one side of the vechicle part.
Simultaneously lay the AutoWrap film on the surface with a quick, smooth movement.
Thereafter, smoothen the AutoWrap by using a squeegee. Important is working from the middle to the edge of the car part as this minimizes wrinkels.
Leaving some wrinkles is acceptable. AutoWrap is designed to protect with or without wrinkles.
Finally, in order to obtain a flush lay-out, use ABI Tape’s designed AutoWrap cutters to cut the film between panels.
Application – function
The car part is now protected for scratches and dirt during assembly, transit and storage.
AutoWrap has at least 6 months of life time after applying.
Removal
AutoWrap ensures an easy and one piece removal without leaving adhesive residue on the surface. A quick pull from one corner is sufficient to remove the film without tearing or ripping.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
It is important that the car part is dry and dust-free prior to application.
If the surface is dirty, clean it with only water.
Afterwards, dry the surface before applying the AutoWrap.
Unwinding
Dispense the AutoWrap. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
The application requires 2 operators that each stand on one side of the vechicle part.
Simultaneously lay the AutoWrap film on the surface with a quick, smooth movement.
Thereafter, smoothen the AutoWrap by using a squeegee. Important is working from the middle to the edge of the car part as this minimizes wrinkels.
Leaving some wrinkles is acceptable. AutoWrap is designed to protect with or without wrinkles.
Finally, in order to obtain a flush lay-out, use ABI Tape’s designed AutoWrap cutters to cut the film between panels.
Application – function
The car part is now protected for scratches and dirt during assembly, transit and storage.
AutoWrap has at least 6 months of life time after applying.
Removal
AutoWrap ensures an easy and one piece removal without leaving adhesive residue on the surface. A quick pull from one corner is sufficient to remove the film without tearing or ripping.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Brent Borremans | Business Unit Manager | Automotive (protective) products
phone +32 55 23 51 71 | mobile +32 478 78 12 56 | mail brent.borremans@abitape.eu
Brent Borremans | Business Unit Manager | Automotive (protective) products
phone +32 55 23 51 71 | mobile +32 478 78 12 56 | mail brent.borremans@abitape.eu
CONTACT US
PR-1402 | AutoWrap tape | protection | polyolefin film | rubber adhesive
Item No.WEB0092
UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage. Top performance features: excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bi
Description
UV-stabilized white polyolefin film with rubber adhesive, specifically designed for exterior (painted surfaces) car protection during assembly, transport and storage.
Top performance features:
Available standard sizes:
Top performance features:
- excellent protection for exterior elements (e.g. acid rain, hail, train and port rust dust, sand storms, bird soil etc.)
- stretchable so easily conforms to all shapes and forms
- easy removal without adhesive residues
- protection of painted car parts: hood, roof, trunk
- protection of other damage prone parts of the car, such as pillars, emblems, door handles, mirrors etc.
| Tesa | Polifilm | Nitto |
|---|---|---|
| Tesa 50560 protective film | Polifilm PFA6173/34
Polifilm PFA6143/32 Polifilm PFA6451/34 Polifilm PFA6104/32 Polifilm PFA6172/34 | Nitto SPV RAPGARD F124 |
- 1500MMX200M
- 300MMX200M
- 150MMX200M
Specifications
- -- PROPERTIES --
- ----------
- Application
- PROTECTION
- Product
- 1402
- Color
- WHITE
- Total thickness (micron)
- 50
- Backing material
- POLYOLEFIN FILM
- Adhesive system
- RUBBER ADHESIVE
- Duration bond
- TEMPORARY
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 500
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 3.4N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 195
- Tensile strength (N/25mm)
- 45
- Tack level (ASTM D3121)
- ROLLING BALL 91CM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
It is important that the car part is dry and dust-free prior to application.
If the surface is dirty, clean it with only water.
Afterwards, dry the surface before applying the AutoWrap.
Unwinding
Dispense the AutoWrap. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
The application requires 2 operators that each stand on one side of the vechicle part.
Simultaneously lay the AutoWrap film on the surface with a quick, smooth movement.
Thereafter, smoothen the AutoWrap by using a squeegee. Important is working from the middle to the edge of the car part as this minimizes wrinkels.
Leaving some wrinkles is acceptable. AutoWrap is designed to protect with or without wrinkles.
Finally, in order to obtain a flush lay-out, use ABI Tape’s designed AutoWrap cutters to cut the film between panels.
Application – function
The car part is now protected for scratches and dirt during assembly, transit and storage.
AutoWrap has at least 6 months of life time after applying.
Removal
AutoWrap ensures an easy and one piece removal without leaving adhesive residue on the surface. A quick pull from one corner is sufficient to remove the film without tearing or ripping.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
It is important that the car part is dry and dust-free prior to application.
If the surface is dirty, clean it with only water.
Afterwards, dry the surface before applying the AutoWrap.
Unwinding
Dispense the AutoWrap. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
The application requires 2 operators that each stand on one side of the vechicle part.
Simultaneously lay the AutoWrap film on the surface with a quick, smooth movement.
Thereafter, smoothen the AutoWrap by using a squeegee. Important is working from the middle to the edge of the car part as this minimizes wrinkels.
Leaving some wrinkles is acceptable. AutoWrap is designed to protect with or without wrinkles.
Finally, in order to obtain a flush lay-out, use ABI Tape’s designed AutoWrap cutters to cut the film between panels.
Application – function
The car part is now protected for scratches and dirt during assembly, transit and storage.
AutoWrap has at least 6 months of life time after applying.
Removal
AutoWrap ensures an easy and one piece removal without leaving adhesive residue on the surface. A quick pull from one corner is sufficient to remove the film without tearing or ripping.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Brent Borremans | Business Unit Manager | Automotive (protective) products
phone +32 55 23 51 71 | mobile +32 478 78 12 56 | mail brent.borremans@abitape.eu
Brent Borremans | Business Unit Manager | Automotive (protective) products
phone +32 55 23 51 71 | mobile +32 478 78 12 56 | mail brent.borremans@abitape.eu
CONTACT US