Top of the page

ABI electrical glass-cloth rubber-adhesive attaching | 0730

Item No. WEB0084
AT-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. AT-0730 complies with US government specification MIL-I-15123 type GFT. Top performance features: Maximum resistance to flagging and varnish solvents Non-corrosive Razor slitting: Resul

Description

AT-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. AT-0730 complies with US government specification MIL-I-15123 type GFT.

Top performance features:
  • Maximum resistance to flagging and varnish solvents
  • Non-corrosive
  • Razor slitting: Results in fray-free edges
Application:
  • Coil banding and attaching
Our tape is the alternative product for:

3M
3M Glass Cloth Electrical Tape 27 is a 7 mil woven insulating tape with pressure sensitive rubber thermosetting adhesive.

Available standard colours:
  • Off-White
Available standard sizes:
  • 12mm x 20m
  • 12mm x 50m
  • 19mm x 33m
  • 25mm x 66m
  • 60mm x 66m
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
ATTACHING
Product
0730
Color
NATURAL
Total thickness (micron)
180
Backing material
GLASS CLOTH
Adhesive system
RUBBER ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
9.93
Peel adhesion 90° (N/25MM) (Afera 5001)
8.77N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
5N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
1.3
Tensile strength (N/25mm)
222.72
Tack level (ASTM D3121)
ROLLING BALL 23CM

Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
When the tape is applied to a clean and dry surface with a suitable pressure you will obtain good results.

Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle
This is a one use only tape. This needs to be removed together with the substrate it is applied upon.

Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US

ABI electrical glass-cloth rubber-adhesive attaching | 0730

Item No. WEB0084
AT-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. AT-0730 complies with US government specification MIL-I-15123 type GFT. Top performance features: Maximum resistance to flagging and varnish solvents Non-corrosive Razor slitting: Resul

Description

AT-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. AT-0730 complies with US government specification MIL-I-15123 type GFT.

Top performance features:
  • Maximum resistance to flagging and varnish solvents
  • Non-corrosive
  • Razor slitting: Results in fray-free edges
Application:
  • Coil banding and attaching
Our tape is the alternative product for:

3M
3M Glass Cloth Electrical Tape 27 is a 7 mil woven insulating tape with pressure sensitive rubber thermosetting adhesive.

Available standard colours:
  • Off-White
Available standard sizes:
  • 12mm x 20m
  • 12mm x 50m
  • 19mm x 33m
  • 25mm x 66m
  • 60mm x 66m
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
ATTACHING
Product
0730
Color
NATURAL
Total thickness (micron)
180
Backing material
GLASS CLOTH
Adhesive system
RUBBER ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
9.93
Peel adhesion 90° (N/25MM) (Afera 5001)
8.77N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
5N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
1.3
Tensile strength (N/25mm)
222.72
Tack level (ASTM D3121)
ROLLING BALL 23CM

Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
When the tape is applied to a clean and dry surface with a suitable pressure you will obtain good results.

Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle
This is a one use only tape. This needs to be removed together with the substrate it is applied upon.

Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US