العربية (مصر)
ABI electrical glass-cloth rubber-adhesive masking | 0730
Item No. WEB0086
Loading
MA-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. MA-0730 complies with US government specification MIL-I-15123 type GFT. Top performance features: Maximum resistance to flagging and varnish solvents Non-corrosive Razor slitting: Resul
Description
MA-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. MA-0730 complies with US government specification MIL-I-15123 type GFT.
Top performance features:
Available standard colours:
Top performance features:
- Maximum resistance to flagging and varnish solvents
- Non-corrosive
- Razor slitting: Results in fray-free edges
- Coil wraps & electroplating application
| 3M |
|---|
| 3M Glass Cloth Electrical Tape 27 is a 7 mil woven insulating tape with pressure sensitive rubber thermosetting adhesive. |
- Off-White
- 12mm x 20m
- 12mm x 50m
- 19mm x 33m
- 25mm x 66m
- 60mm x 66m
Specifications
- -- PROPERTIES --
- ----------
- Application
- MASKING
- Product
- 0730
- Color
- NATURAL
- Total thickness (micron)
- 180
- Backing material
- GLASS CLOTH
- Adhesive system
- RUBBER ADHESIVE
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 9.93
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 8.77N/25MM
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 5N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 1.3
- Tensile strength (N/25mm)
- 222.72
- Tack level (ASTM D3121)
- ROLLING BALL 23CM
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
When the tape is applied to a clean and dry surface with a suitable pressure you will obtain good results.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a one use only tape. This needs to be removed together with the substrate it is applied upon.
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US
Loading
ABI electrical glass-cloth rubber-adhesive masking | 0730
Item No. WEB0086
MA-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. MA-0730 complies with US government specification MIL-I-15123 type GFT. Top performance features: Maximum resistance to flagging and varnish solvents Non-corrosive Razor slitting: Resul
Description
MA-0730 is a glass fiber cloth (‘fiberglass fabric’) tape with a proprietary Therm-X rubber based adhesive system. MA-0730 complies with US government specification MIL-I-15123 type GFT.
Top performance features:
Available standard colours:
Top performance features:
- Maximum resistance to flagging and varnish solvents
- Non-corrosive
- Razor slitting: Results in fray-free edges
- Coil wraps & electroplating application
| 3M |
|---|
| 3M Glass Cloth Electrical Tape 27 is a 7 mil woven insulating tape with pressure sensitive rubber thermosetting adhesive. |
- Off-White
- 12mm x 20m
- 12mm x 50m
- 19mm x 33m
- 25mm x 66m
- 60mm x 66m
Specifications
- -- PROPERTIES --
- ----------
- Application
- MASKING
- Product
- 0730
- Color
- NATURAL
- Total thickness (micron)
- 180
- Backing material
- GLASS CLOTH
- Adhesive system
- RUBBER ADHESIVE
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 9.93
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 8.77N/25MM
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 5N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 1.3
- Tensile strength (N/25mm)
- 222.72
- Tack level (ASTM D3121)
- ROLLING BALL 23CM
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
When the tape is applied to a clean and dry surface with a suitable pressure you will obtain good results.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a one use only tape. This needs to be removed together with the substrate it is applied upon.
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US