HO-9166 | Electrical Tape | holding down | polyester film | rubber adhesive

Item No.WEB0056
9166 is a strong tear resistant polyester film combined with a high temperature resistant, proprietary blended rubber adhesive. Top performance features: high temperature resistance: up to 204°C (depending on exact application) high tensile strength (100 N/25mm) Application: holding down tape where

Description

9166 is a strong tear resistant polyester film combined with a high temperature
resistant, proprietary blended rubber adhesive.

Top performance features:
  • high temperature resistance: up to 204°C (depending on exact application)
  • high tensile strength (100 N/25mm)
Application:
  • holding down tape where silicone contamination is unacceptable
Available standard sizes:
  • 50MMX66M
  • 25MMX66M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
HOLDING DOWN
Product
9166
Color
GREEN
Total thickness (micron)
80
Total thickness Range
[0 - 100> micron
Backing material
POLYESTER FILM
Thickness backing
0.05MM
Thickness backing Range
[0 - 100 micron
Adhesive system
RUBBER ADHESIVE
Thickness adhesive
0.03MM
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (Afera 5004)
100
Elongation (Afera 5004) Range
[100 - 200> cm
Peel adhesion 90° (N/25MM) (Afera 5001)
6.5N/25MM
Peel adhesion 90° (Afera 5001) Range
[5 - 10> N/25mm
Peel adhesion 180° (N/25MM) (Afera 5001)
8.2N/25MM
Peel adhesion 180° (Afera 5001) Range
[5 - 10> N/25mm
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
146
Peel multiplier Range
[100 - 150> %
Tensile strength (N/25mm)
109
Tensile strength Range
[100 - 200> N/25mm
Tack level (ASTM D3121)
ROLLING BALL 79CM
Tack level (ASTM D3121) Range
[50 and up cm
Max Temp (°C)
204
Max Temp Range
[200 - 250> °C
HO-9166
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface
 
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
 
Unwinding
 
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
 
Application – act
 
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
 
Removal
 
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
 
Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US

HO-9166 | Electrical Tape | holding down | polyester film | rubber adhesive

Item No.WEB0056
9166 is a strong tear resistant polyester film combined with a high temperature resistant, proprietary blended rubber adhesive. Top performance features: high temperature resistance: up to 204°C (depending on exact application) high tensile strength (100 N/25mm) Application: holding down tape where

Description

9166 is a strong tear resistant polyester film combined with a high temperature
resistant, proprietary blended rubber adhesive.

Top performance features:
  • high temperature resistance: up to 204°C (depending on exact application)
  • high tensile strength (100 N/25mm)
Application:
  • holding down tape where silicone contamination is unacceptable
Available standard sizes:
  • 50MMX66M
  • 25MMX66M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
HOLDING DOWN
Product
9166
Color
GREEN
Total thickness (micron)
80
Total thickness Range
[0 - 100> micron
Backing material
POLYESTER FILM
Thickness backing
0.05MM
Thickness backing Range
[0 - 100 micron
Adhesive system
RUBBER ADHESIVE
Thickness adhesive
0.03MM
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (Afera 5004)
100
Elongation (Afera 5004) Range
[100 - 200> cm
Peel adhesion 90° (N/25MM) (Afera 5001)
6.5N/25MM
Peel adhesion 90° (Afera 5001) Range
[5 - 10> N/25mm
Peel adhesion 180° (N/25MM) (Afera 5001)
8.2N/25MM
Peel adhesion 180° (Afera 5001) Range
[5 - 10> N/25mm
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
146
Peel multiplier Range
[100 - 150> %
Tensile strength (N/25mm)
109
Tensile strength Range
[100 - 200> N/25mm
Tack level (ASTM D3121)
ROLLING BALL 79CM
Tack level (ASTM D3121) Range
[50 and up cm
Max Temp (°C)
204
Max Temp Range
[200 - 250> °C
HO-9166
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface
 
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
 
Unwinding
 
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
 
Application – act
 
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
 
Removal
 
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
 
Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US