Top of the page

HO-9266 | Electrical Tape | masking | polyester film | rubber adhesive

Item No. WEB0065
9266 is a strong tear resistant polyester film combined with a high temperature resistant, proprietary blended, rubber adhesive. Top performance features: high temperature resistance: up to 204°C (depending on exact application) high tensile strength (225 N/25mm) Application: holding down tape where
       

Description

9266 is a strong tear resistant polyester film combined with a high temperature resistant, proprietary blended, rubber adhesive.

Top performance features:
  • high temperature resistance: up to 204°C (depending on exact application)
  • high tensile strength (225 N/25mm)
Application:
  • holding down tape where silicone contamination is unacceptable
Our tape is the alternative product for:

Saint-Gobain
Saint-Gobain M852 CHR M-Series (2 Mil PET/Rubber Adhesive) is manufactured from polyester film with rubber pressure-sensitive adhesive.
Polyester backing resists damage from sharp edges, and protects tool surfaces from abuse and adhesive flash in vacuum bag sealing.

Available standard sizes:
  • 50MMX66M
  • 25MMX66M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
HOLDING DOWN
Product
9266
Color
GREEN
Total thickness (micron)
100
Backing material
POLYESTER FILM
Thickness backing
0.05MM
Adhesive system
RUBBER ADHESIVE
Thickness adhesive
0.05MM
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
200
Peel adhesion 90° (N/25MM) (Afera 5001)
6.5N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
8.2N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
140
Tensile strength (N/25mm)
219
Tack level (ASTM D3121)
ROLLING BALL 39CM
Max Temp (°C)
204
HO-9266
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US

HO-9266 | Electrical Tape | masking | polyester film | rubber adhesive

Item No. WEB0065
9266 is a strong tear resistant polyester film combined with a high temperature resistant, proprietary blended, rubber adhesive. Top performance features: high temperature resistance: up to 204°C (depending on exact application) high tensile strength (225 N/25mm) Application: holding down tape where
       

Description

9266 is a strong tear resistant polyester film combined with a high temperature resistant, proprietary blended, rubber adhesive.

Top performance features:
  • high temperature resistance: up to 204°C (depending on exact application)
  • high tensile strength (225 N/25mm)
Application:
  • holding down tape where silicone contamination is unacceptable
Our tape is the alternative product for:

Saint-Gobain
Saint-Gobain M852 CHR M-Series (2 Mil PET/Rubber Adhesive) is manufactured from polyester film with rubber pressure-sensitive adhesive.
Polyester backing resists damage from sharp edges, and protects tool surfaces from abuse and adhesive flash in vacuum bag sealing.

Available standard sizes:
  • 50MMX66M
  • 25MMX66M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
HOLDING DOWN
Product
9266
Color
GREEN
Total thickness (micron)
100
Backing material
POLYESTER FILM
Thickness backing
0.05MM
Adhesive system
RUBBER ADHESIVE
Thickness adhesive
0.05MM
Duration bond
TEMPORARY
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
200
Peel adhesion 90° (N/25MM) (Afera 5001)
6.5N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
8.2N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
140
Tensile strength (N/25mm)
219
Tack level (ASTM D3121)
ROLLING BALL 39CM
Max Temp (°C)
204
HO-9266
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US