Top of the page

PR-7270 | Electrical Tape | protection | polyimide film | silicone adhesive

Item No. WEB0081
PR-7270  is a polyimide single coated tape with silicone adhesive. Used for protecting and insulating specific areas of aircraft, trains and wind mill composite components during and after production. Top performance features: dimensionally stable at high temperatures (180°C) flame retardant very go
       

Description

PR-7270  is a polyimide single coated tape with silicone adhesive.
Used for protecting and insulating specific areas of aircraft, trains and wind mill composite components during and after production.

Top performance features:
  • dimensionally stable at high temperatures (180°C)
  • flame retardant
  • very good chemical and solvent resistance
  • excellent cold and voltage resistance
  • excellent insulation
Application:
  • protection/holding down
Our tape is the alternative product for:

TesaSaint-Gobain
Tesa 41408 Premium Grade Polyimide TapeSaint-Gobain CHR K202 is manufactured from a special grade polyimide backing material with a high-temperature silicone pressure-sensitive adhesive

Available standard sizes:
  • 25MMX33M
  • 19MMx33M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
PROTECTION
Product
7270
Color
AMBER
Total thickness (micron)
63
Backing material
POLYIMIDE FILM
Adhesive system
SILICONE ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
76
Peel adhesion 90° (N/25MM) (Afera 5001)
7N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
6.01N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
186
Tensile strength (N/25mm)
227.99
Tack level (ASTM D3121)
ROLLING BALL 1.5CM
PR-7270
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US

PR-7270 | Electrical Tape | protection | polyimide film | silicone adhesive

Item No. WEB0081
PR-7270  is a polyimide single coated tape with silicone adhesive. Used for protecting and insulating specific areas of aircraft, trains and wind mill composite components during and after production. Top performance features: dimensionally stable at high temperatures (180°C) flame retardant very go
       

Description

PR-7270  is a polyimide single coated tape with silicone adhesive.
Used for protecting and insulating specific areas of aircraft, trains and wind mill composite components during and after production.

Top performance features:
  • dimensionally stable at high temperatures (180°C)
  • flame retardant
  • very good chemical and solvent resistance
  • excellent cold and voltage resistance
  • excellent insulation
Application:
  • protection/holding down
Our tape is the alternative product for:

TesaSaint-Gobain
Tesa 41408 Premium Grade Polyimide TapeSaint-Gobain CHR K202 is manufactured from a special grade polyimide backing material with a high-temperature silicone pressure-sensitive adhesive

Available standard sizes:
  • 25MMX33M
  • 19MMx33M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
PROTECTION
Product
7270
Color
AMBER
Total thickness (micron)
63
Backing material
POLYIMIDE FILM
Adhesive system
SILICONE ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
76
Peel adhesion 90° (N/25MM) (Afera 5001)
7N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
6.01N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
186
Tensile strength (N/25mm)
227.99
Tack level (ASTM D3121)
ROLLING BALL 1.5CM
PR-7270
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US