PR-0488 | HVAC Tape | protection | aluminium foil | rubber adhesive
Item No. WEB0014
PR-0488 Â is a 50-micron, alloy aluminium foil with a pressure sensitive adhesive and paper liner. Top performance features: dead Soft Aluminum Foil: conforms to irregular surfaces such as FSK facings and blends with the basic facing pattern foil as a vapor barrier assures integrity of the insulation
  Â
  Â
Description
PR-0488 Â is a 50-micron, alloy aluminium foil with a pressure sensitive adhesive and
paper liner.
Top performance features:
with liner (WL)
paper liner.
Top performance features:
- dead Soft Aluminum Foil: conforms to irregular surfaces such as FSK facings and blends with the basic facing pattern
- foil as a vapor barrier assures integrity of the insulation system
- special rubber adhesive: This aggressive adhesive, once applied, assures durable performance
- UL 723 rated
- provides a dependable vapour barrier when applied to clean, dry surfaces, e.g. fibreglass duct-board systems, FSK facings, etc.
with liner (WL)
- 25MMx50M
- 50MMx50M
- 100MMx50M
- 150MMx50M
- 100MMx50M
- 19MMx50MÂ Â Â
- 25MMx50M
- 38MMx50M
- 50MMx50M
- 50MMx55M
- 75MMx50M
Specifications
- -- PROPERTIES --
- ----------
- Application
- PROTECTION
- Product
- 0488
- Color
- SILVER
- Total thickness (micron)
- 90
- Backing material
- ALUMINIUM FOIL
- Adhesive system
- RUBBER ADHESIVE
- UL Certified
- UL 723
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 3
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 25N/25MM
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 25.3N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 115
- Tensile strength (N/25mm)
- 75.6
- Tack level (ASTM D3121)
- ROLLING BALL 19CM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US
PR-0488 | HVAC Tape | protection | aluminium foil | rubber adhesive
Item No. WEB0014
PR-0488 Â is a 50-micron, alloy aluminium foil with a pressure sensitive adhesive and paper liner. Top performance features: dead Soft Aluminum Foil: conforms to irregular surfaces such as FSK facings and blends with the basic facing pattern foil as a vapor barrier assures integrity of the insulation
  Â
  Â
Description
PR-0488 Â is a 50-micron, alloy aluminium foil with a pressure sensitive adhesive and
paper liner.
Top performance features:
with liner (WL)
paper liner.
Top performance features:
- dead Soft Aluminum Foil: conforms to irregular surfaces such as FSK facings and blends with the basic facing pattern
- foil as a vapor barrier assures integrity of the insulation system
- special rubber adhesive: This aggressive adhesive, once applied, assures durable performance
- UL 723 rated
- provides a dependable vapour barrier when applied to clean, dry surfaces, e.g. fibreglass duct-board systems, FSK facings, etc.
with liner (WL)
- 25MMx50M
- 50MMx50M
- 100MMx50M
- 150MMx50M
- 100MMx50M
- 19MMx50MÂ Â Â
- 25MMx50M
- 38MMx50M
- 50MMx50M
- 50MMx55M
- 75MMx50M
Specifications
- -- PROPERTIES --
- ----------
- Application
- PROTECTION
- Product
- 0488
- Color
- SILVER
- Total thickness (micron)
- 90
- Backing material
- ALUMINIUM FOIL
- Adhesive system
- RUBBER ADHESIVE
- UL Certified
- UL 723
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 3
- Peel adhesion 90° (N/25MM) (Afera 5001)
- 25N/25MM
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 25.3N/25MM
- Dwell time (hrs)
- 72
- Peel multiplier @ dwell time (%)
- 115
- Tensile strength (N/25mm)
- 75.6
- Tack level (ASTM D3121)
- ROLLING BALL 19CM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US