Top of the page

PR-0499 | HVAC Tape | protection | aluminium foil | rubber adhesive

Item No. WEB0026
PR-0499 is a 30-micron high tensile strength aluminium foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper liner. Top performance features: aluminium backing provides excellent reflection of both heat and light high qual

Description

PR-0499 is a 30-micron high tensile strength aluminium foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone
release paper liner.

Top performance features:
  • aluminium backing provides excellent reflection of both heat and light
  • high quality adhesive with super strong adhesion and holding power offers reliableand durable Foil-Scrim-Kraft facing joints and seams sealing in HVAC ductwork applications
  • low moisture vapour transmission rate makes 499 an excellent vapour barrier
Application:
  • used in the HVAC industry to keep vapor, air and other gasses inside the ducts thereby reducing leakage, energy and air consumption and protecting the exterior from possible negative effects of leaking vapor, air and gasses
Available standard sizes:
  • 100MMx50M
  • 50MMx45M
  • 50MMx50M
  • 75MMx50M
  • 50MMx20M
  • 170MMx50M
  • 55MMx50M
  • 100MMx45M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
PROTECTION
Product
0499
Color
SILVER
Total thickness (micron)
70
Backing material
ALUMINIUM FOIL
Adhesive system
RUBBER ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
3
Peel adhesion 90° (N/25MM) (Afera 5001)
25N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
18.1N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
127
Tensile strength (N/25mm)
45
Tack level (ASTM D3121)
ROLLING BALL 23CM
PR-0499
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US

PR-0499 | HVAC Tape | protection | aluminium foil | rubber adhesive

Item No. WEB0026
PR-0499 is a 30-micron high tensile strength aluminium foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper liner. Top performance features: aluminium backing provides excellent reflection of both heat and light high qual

Description

PR-0499 is a 30-micron high tensile strength aluminium foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone
release paper liner.

Top performance features:
  • aluminium backing provides excellent reflection of both heat and light
  • high quality adhesive with super strong adhesion and holding power offers reliableand durable Foil-Scrim-Kraft facing joints and seams sealing in HVAC ductwork applications
  • low moisture vapour transmission rate makes 499 an excellent vapour barrier
Application:
  • used in the HVAC industry to keep vapor, air and other gasses inside the ducts thereby reducing leakage, energy and air consumption and protecting the exterior from possible negative effects of leaking vapor, air and gasses
Available standard sizes:
  • 100MMx50M
  • 50MMx45M
  • 50MMx50M
  • 75MMx50M
  • 50MMx20M
  • 170MMx50M
  • 55MMx50M
  • 100MMx45M
If you need a customized size, please contact our product specialist.

Specifications

-- PROPERTIES --
----------
Application
PROTECTION
Product
0499
Color
SILVER
Total thickness (micron)
70
Backing material
ALUMINIUM FOIL
Adhesive system
RUBBER ADHESIVE
-- PERFORMANCE --
----------
Elongation (%) (Afera 5004)
3
Peel adhesion 90° (N/25MM) (Afera 5001)
25N/25MM
Peel adhesion 180° (N/25MM) (Afera 5001)
18.1N/25MM
Dwell time (hrs)
72
Peel multiplier @ dwell time (%)
127
Tensile strength (N/25mm)
45
Tack level (ASTM D3121)
ROLLING BALL 23CM
PR-0499
Storage conditions

Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
  • 68 - 72 F / 20 - 22 C
  • 50 - 70% relative humidity
  • Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
Preparation of the surface

The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters, and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.

Unwinding

Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.

Application – act

Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.

Removal

Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.

Discard / Recycle

This is a temporary tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail 
robrecht.vanvaerenbergh@abitape.eu
CONTACT US