العربية (مصر)
HO-02223 | holding down | cloth | rubber adhesive
Item No. WEB0101
Loading
Ideal Tape HO-02223 is a high adhesion double coated natural cloth tape with rubber adhesive and silicone coated release paper. Top performance features: Resists wear and tear when in contact with rough or uneven surfaces. Impact and tear resistant to assure against on-the-job failures in heavy duty
  Â
  Â
Description
Ideal Tape HO-02223 is a high adhesion double coated natural cloth tape with rubber adhesive and silicone coated release paper.
Top performance features:
Top performance features:
- Resists wear and tear when in contact with rough or uneven surfaces.
- Impact and tear resistant to assure against on-the-job failures in heavy duty mounting and splicing applications.
- It conforms readily to irregular surfaces such foils, non-wovens, fims, tubing and wires.
- It is suitable for use with metallic and non-metallic honeycomb cores.
- This tape is an ideal product for bin marking and other uses requiring identification.
- It is widely used for holding honeycomb cores during machining while allowing the core to be removed without residue, holding the core firmly in position.Â
- It can be used to hold down plastic spiral wrap used as a vacuum manifold in the resin infusion process.
- 12MMX33M
- 25MMX33M
- 50MMX33M
- 100MMX33M
Specifications
- -- PROPERTIES --
- ----------
- Application
- HOLDING DOWN
- Product
- 02223
- Color
- NATURAL
- Total thickness (micron)
- 271
- Backing material
- CLOTH
- Thickness backing
- 0.177MM
- Adhesive system
- RUBBER ADHESIVE
- Thickness adhesive
- 0.088MM
- Duration bond
- PERMANENT
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 8
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 13.9N/25MM
- Tensile strength (N/25mm)
- 235.7
Loading
HO-02223 | holding down | cloth | rubber adhesive
Item No. WEB0101
Ideal Tape HO-02223 is a high adhesion double coated natural cloth tape with rubber adhesive and silicone coated release paper. Top performance features: Resists wear and tear when in contact with rough or uneven surfaces. Impact and tear resistant to assure against on-the-job failures in heavy duty
  Â
  Â
Description
Ideal Tape HO-02223 is a high adhesion double coated natural cloth tape with rubber adhesive and silicone coated release paper.
Top performance features:
Top performance features:
- Resists wear and tear when in contact with rough or uneven surfaces.
- Impact and tear resistant to assure against on-the-job failures in heavy duty mounting and splicing applications.
- It conforms readily to irregular surfaces such foils, non-wovens, fims, tubing and wires.
- It is suitable for use with metallic and non-metallic honeycomb cores.
- This tape is an ideal product for bin marking and other uses requiring identification.
- It is widely used for holding honeycomb cores during machining while allowing the core to be removed without residue, holding the core firmly in position.Â
- It can be used to hold down plastic spiral wrap used as a vacuum manifold in the resin infusion process.
- 12MMX33M
- 25MMX33M
- 50MMX33M
- 100MMX33M
Specifications
- -- PROPERTIES --
- ----------
- Application
- HOLDING DOWN
- Product
- 02223
- Color
- NATURAL
- Total thickness (micron)
- 271
- Backing material
- CLOTH
- Thickness backing
- 0.177MM
- Adhesive system
- RUBBER ADHESIVE
- Thickness adhesive
- 0.088MM
- Duration bond
- PERMANENT
- -- PERFORMANCE --
- ----------
- Elongation (%) (Afera 5004)
- 8
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 13.9N/25MM
- Tensile strength (N/25mm)
- 235.7
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US