العربية (مصر)
AT-04000 | ATTACHING | POLYETHYLENE | ACRYLIC ADHESIVE
Item No. WEB0100
Loading
Ideal Tape AT-04000 is a double sided adhesive carpet tape. Top performance features: Does not leave traces of adhesive on the floor. Peelable external side. Easy-to-tear blue liner. Application: Carpet tape for fairs, exhibitions, salons, etc. Available standard sizes: 25MMX50M 50MMX50M If you need
  Â
  Â
Description
Ideal Tape AT-04000 is a double sided adhesive carpet tape.
Top performance features:
Top performance features:
- Does not leave traces of adhesive on the floor.
- Peelable external side.
- Easy-to-tear blue liner.
- Carpet tape for fairs, exhibitions, salons, etc.
- 25MMX50M
- 50MMX50M
Specifications
- -- PROPERTIES --
- ----------
- Application
- ATTACHING
- Product
- 04000
- Color
- BLUE
- Liner
- Siliconised paper
- Total thickness (micron)
- 150
- Backing material
- POLYETHYLENE FILM
- Thickness backing
- 0.06MM
- Adhesive system
- ACRYLIC ADHESIVE
- Thickness adhesive
- 0.09MM
- Duration bond
- PERMANENT
- -- PERFORMANCE --
- ----------
- Min Temp (°C)
- -10
- Max Temp (°C)
- 60
- Adhesion to steel permanent
- 32N/25MM
- Adhesive strength internal
- 32N/25MM
- Adhesion to steel removable
- 5N/25MM
- Adhesive strength external
- 5N/25MM
Loading
AT-04000 | ATTACHING | POLYETHYLENE | ACRYLIC ADHESIVE
Item No. WEB0100
Ideal Tape AT-04000 is a double sided adhesive carpet tape. Top performance features: Does not leave traces of adhesive on the floor. Peelable external side. Easy-to-tear blue liner. Application: Carpet tape for fairs, exhibitions, salons, etc. Available standard sizes: 25MMX50M 50MMX50M If you need
  Â
  Â
Description
Ideal Tape AT-04000 is a double sided adhesive carpet tape.
Top performance features:
Top performance features:
- Does not leave traces of adhesive on the floor.
- Peelable external side.
- Easy-to-tear blue liner.
- Carpet tape for fairs, exhibitions, salons, etc.
- 25MMX50M
- 50MMX50M
Specifications
- -- PROPERTIES --
- ----------
- Application
- ATTACHING
- Product
- 04000
- Color
- BLUE
- Liner
- Siliconised paper
- Total thickness (micron)
- 150
- Backing material
- POLYETHYLENE FILM
- Thickness backing
- 0.06MM
- Adhesive system
- ACRYLIC ADHESIVE
- Thickness adhesive
- 0.09MM
- Duration bond
- PERMANENT
- -- PERFORMANCE --
- ----------
- Min Temp (°C)
- -10
- Max Temp (°C)
- 60
- Adhesion to steel permanent
- 32N/25MM
- Adhesive strength internal
- 32N/25MM
- Adhesion to steel removable
- 5N/25MM
- Adhesive strength external
- 5N/25MM
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US