العربية (مصر)
HO-00900 | SHOE TAPE | HOLDING | CARRIERLESS | RUBBER ADHESIVE
Item No. WEB0103
Loading
Ideal Tape HO-00900 is a dot coated transfer tape, used in many temporary and permanent assembly operations. Known as Tackseal tape, it is a baseless (i.e without carrier) tape, where the dotted rubber adhesive is coated on the liner. Top performance features: Good adhesion, peel and shear performa
  Â
  Â
Description
Ideal Tape HO-00900 is a dot coated transfer tape, used in many temporary and permanent assembly operations.Â
Known as Tackseal tape, it is a baseless (i.e without carrier) tape, where the dotted rubber adhesive is coated on the liner.
Top performance features:
Known as Tackseal tape, it is a baseless (i.e without carrier) tape, where the dotted rubber adhesive is coated on the liner.
Top performance features:
- Good adhesion, peel and shear performance.
- Good heat resistance.
- Easy application.
- For transfer of letters on shoes.
- For temporary assembly of zippers, fasteners, sews of leather seats, shoes, handbags, etc.Â
- 15MMX50M
- 50MMX50M
- 150MMX50M
- 165MMX50M
- 500MMX50M
- also in 150mm width for use on dispenser machines
Specifications
- -- PROPERTIES --
- ----------
- Application
- HOLDING DOWN
- Product
- 00900
- Color
- LIGHT BEIGE
- Total thickness (micron)
- 50
- Backing material
- CARRIERLESS
- Adhesive system
- SYNTHETIC RUBBER ADHESIVE
- Duration bond
- PERMANENT
- -- PERFORMANCE --
- ----------
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 40N/25MM
- Tensile strength (N/25mm)
- 13
- Min Temp (°C)
- -40
- Max Temp (°C)
- 50
Loading
HO-00900 | SHOE TAPE | HOLDING | CARRIERLESS | RUBBER ADHESIVE
Item No. WEB0103
Ideal Tape HO-00900 is a dot coated transfer tape, used in many temporary and permanent assembly operations. Known as Tackseal tape, it is a baseless (i.e without carrier) tape, where the dotted rubber adhesive is coated on the liner. Top performance features: Good adhesion, peel and shear performa
  Â
  Â
Description
Ideal Tape HO-00900 is a dot coated transfer tape, used in many temporary and permanent assembly operations.Â
Known as Tackseal tape, it is a baseless (i.e without carrier) tape, where the dotted rubber adhesive is coated on the liner.
Top performance features:
Known as Tackseal tape, it is a baseless (i.e without carrier) tape, where the dotted rubber adhesive is coated on the liner.
Top performance features:
- Good adhesion, peel and shear performance.
- Good heat resistance.
- Easy application.
- For transfer of letters on shoes.
- For temporary assembly of zippers, fasteners, sews of leather seats, shoes, handbags, etc.Â
- 15MMX50M
- 50MMX50M
- 150MMX50M
- 165MMX50M
- 500MMX50M
- also in 150mm width for use on dispenser machines
Specifications
- -- PROPERTIES --
- ----------
- Application
- HOLDING DOWN
- Product
- 00900
- Color
- LIGHT BEIGE
- Total thickness (micron)
- 50
- Backing material
- CARRIERLESS
- Adhesive system
- SYNTHETIC RUBBER ADHESIVE
- Duration bond
- PERMANENT
- -- PERFORMANCE --
- ----------
- Peel adhesion 180° (N/25MM) (Afera 5001)
- 40N/25MM
- Tensile strength (N/25mm)
- 13
- Min Temp (°C)
- -40
- Max Temp (°C)
- 50
Storage conditions
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Pressure sensitive tapes need to be stored under defined conditions. Extreme high temperatures can lead to degradation of the adhesive or backing materials. Extreme low temperatures might influence the bonding characteristics.
The generally recommended storage conditions are:
- 68 - 72 F / 20 - 22 C
- 50 - 70% relative humidity
- Rolls store flat in their original packaging, away from direct sources of UV (i.e., lights, sun).
The bonding surface should be clean and dry, free from any contaminants that may affect the adhesive bond, such as dust, grease, oil or lint.
This stage can involve the use of evaporative solvents such as methyl ethyl ketone (MEK) to remove compounds accumulated through prior use or exposure to the elements and/or cleaning products such as isopropyl alcohol, esters and naphtha-based products.
Some projects may require primer application, flame treatment, corona treatments or pretreatment methods to improve surface energy.
Unwinding
Dispense the tape. A free standing portable unwind station could support you during this step. Dispensing predetermined lengths might help to minimize waste.
Application – act
Depending on the project requirements and restrictions, industry professionals can employ manual or equipment-assisted application methods.
Removal
Sometimes clean removal of pressure sensitive tape can be difficult without damaging the substrate that it is adhered to. Pulling at a slow rate and with a low angle of peel helps reduce surface damage. PSA residue can be softened with certain organic solvents or heat.
Discard / Recycle
This is a permanent tape – once removed one can discard / dispose without special instructions.
ABI Tape takes responsibility for our planet. As such, we are currently working on tapes that have an accelerated biodegradable function on the backing. Stay tuned …
Questions? Get in touch with our product specialist directly!
Robrecht Van Vaerenbergh | Business Unit Manager | Technical, HVAC & double sided products
phone +32 55 23 51 58 | mobile +32 472 22 41 76 | mail robrecht.vanvaerenbergh@abitape.eu
CONTACT US